Electrolux FAC124P1A Instrukcje Operacyjne Pobierz pdf (Strona 36)

Section 2 Installation

2-6

Window Mounting

Remove Chassis

1. Pull down front grille panel and remove filter.

(See Figure 2-14).

2. Lift front panel upwards and remove.

3. Extract the 4 front panel screws. (See Figure 2-15)

4. Pry away front panel from cabinet sides.

(See Figure 2-16)

5. Gently lift front off unit and place to one side.

6. Remove shipping screws from top of unit and also on

the side by the base if installed.

7. Hold the cabinet while pulling on the base handle,

and carefully remove the unit.

8. Add two foam inserts to holes in top of cabinet

where shipping screws were removed from. (See

Figure 2-17)

9. Your unit may come with internal packaging by the

compressor and condenser fan assembly. This

packaging must be removed prior to installing the air

conditioner back into the cabinet. (See Figure 2-17)

Install Top Angle and Side Bracket

1. Attach foam gasket to top angle above holes as

shown in Figure 2-18.

2. Install top angle and side retainers to cabinet as

shown in Figure 2-18.

Assemble Window Filler Panels

1. Place cabinet on floor, a bench, or a table.

2. Slide “I” section of window filler panel into side

retainer on the side of the cabinet (See Figures 2-19

and 2-20). Do both sides.

Figure 2-14.

Figure 2-16.

Figure 2-15.

Figure 2-18.

Figure 2-17.

Plastic

Frame

Window Filler

Panel

Side Retainer

Air Conditioner

Cabinet

Top

View

Plastic

Frame

"I" Section

Window

Filler Panel

Locking

Screw

Hole

Figure 2-19.

Figure 2-20.

Screws

Tab

TabTab

Pull Away

and Down

Foam Inserts

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 139 140

Komentarze do niniejszej Instrukcji

Brak uwag

Electrolux FAC124P1A Instrukcje Operacyjne Strona 36

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Klimatyzatory typu split Electrolux FAC124P1A