Electrolux EQBH60AS Instrukcja Użytkownika Pobierz pdf (Strona 21)

electrolux integrated bbq 600/300mm maintenance & troubleshooting 21

Maintenance

Stainless steel burners

Burners should be checked at least once per year and

cleaned as necessary. Inspect burners to ensure no

residues have been deposited and gas ports are clear.

Troubleshooting

problem possible causes solution

Barbecue won’t light • No gas • Check isolation valve is ON

• Gas bottle empty – rell or change gas bottle

• Ignition system not working • Check spark being generated when knob rotated

• Ignition electrode wet or dirty, gently clean and

dry electrode, ensuring position unchanged

• Manually light the barbecue

Excess smoke being emitted

from the cooking area

• Too much heat • Turn down gas valve or turn off selected burners

Smell of gas

DO NOT ATTEMPT TO LIGHT

THE APPLIANCE

• Gas leak • Turn off gas at the isolation valve

• Check for leaks, tighten joints

• If problem persists, call Electrolux service

If you still require service

If you have a problem, and the problem persists after you

have made the checks mentioned above, contact your nearest

Electrolux approved Service Centre or dealer from whom you

bought the barbecue. Be ready to quote the model number and

8 digit serial number, which is stated on the label located behind

the removable grease recepticles.

data label

removable grease recepticles

INTBBQ600/300_Jun11.indd 21 30/06/11 11:53 AM

1 2 ... 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag