Electrolux Electric Slide-In Range Instrukcja Naprawy Pobierz pdf (Strona 35)

3-13

Section 3 Electronic Controls Guide

SETTING THE SABBATH FEATURE (foruseon

theJewishSabbath&Holidays)

The BAKE TIME and DELAY START pads are used to

set the Sabbath feature. The Sabbath feature may only be

used with the BAKE pad. The oven temperature may be

sethigherorloweraftersettingtheSabbathfeature(the

oven temperature adjustment feature should be used only

duringJewishHolidays),howeverthedisplaywillnotvisibly

show or provide any audible tones indicating whether the

change occurred correctly. Once the oven is properly set

using Bake with the Sabbath feature active, the oven will

remain continuously ON until cancelled. This will override

the factory preset 6-Hour Energy Saving feature.

If the oven light will be needed during the Sabbath, press

OVEN LIGHT before activating the Sabbath feature.

Once the oven light is turned ON and the Sabbath feature

is active, the oven light will remain ON until the Sabbath

feature is turned OFF. If the oven light needs to be OFF,

be sure to turn the oven light OFF before activating the

Sabbath feature.

IMPORTANT

It is not advised to attempt to activate any other program

feature other than BAKE while the Sabbath feature is

active. ONLY the following key pads will function after

setting the Sabbath feature; 0 to 9, BAKE, START &

CANCEL. All other keypads should not be used once

the Sabbath feature is properly activated.



NOTE

You may change the oven temperature once baking has

started by pressing BAKE, the numeric key pads for the

temperatureyouwant(examplefor425°Cpress4 2 5)

and then pressing START twice (for Jewish Holidays

only).Rememberthatthe oven control will no longer

beep or display any further changes once the oven

is set for the Sabbath feature.

To Program the Oven to Begin Baking Immediately &

activate the Sabbath feature (example:bakingat350°F)

1. Be sure that the clock is set with the correct time of day.

2. Place the food in the oven.

3. Press BAKE. “350°” appears in the display.

4. Press START. The actual oven temperature appears in

the display.

5. If you desire to set the oven control for a Bake Time

or Delayed Bake Time do so at this time. If not, skip

this step and continue to step 7. Refer to the Bake

Time / Delay Start section for complete instructions.

Remember the oven will shut down after using Bake

Time or Delay Start and therefore may only be used

once during the Sabbath/Jewish Holidays.

6. The oven will turn ON and begin heating.

7. Press and hold both the BAKE TIME and DELAY

START pads for at least 3 seconds. “SAb” will appear

in the display. Once “SAb” appears in the display the

oven control will no longer beep or display any further

changes and the oven is properly set for the Sabbath

feature.

8. TheovenmaybeturnedOFFatanytimebyrstpressing

CANCELpad(thiswillturntheovenOFFonly).Toturn

OFF the Sabbath feature press and hold both the BAKE

TIME and DELAY START pads for at least 3 seconds.

“SAb” will disappear from the display.

Should you experience a power failure or interruption, the

oven will shut off. When power is returned, “SF”(Sabbath

Failure)willbeshownintheovendisplayandthecooktop

displays(modelsB&C).Theovenandcooktopwillnotturn

back on automatically. If your food was nearly fully cooked,

youmayallowthetrappedheatintheoventonishthe

cooking process. Otherwise, you should remove the food

when the power failure occurs, because you may only start

the oven once during the Sabbath/Jewish Holidays. After the

Sabbath observance, turn OFF the Sabbath feature and be

sure that all the control knobs are at the OFF position. The

appliance may be used again with all normal functions.

After the Sabbath observance turn OFF the Sabbath feature.

Press and hold both the BAKE TIME and DELAY pads for at

least 3 seconds. “SAb” will disappear from the display and

the oven may be used with all normal functions. For further

assistance, guidelines for proper usage, and a complete list

of models with the Sabbath feature, please visit the web at

http:\\www.star-k.org.

How the Electronic Surface Element Controls

work when the Sabbath feature is ON.

(model B & C only)

When your Oven Sabbath feature is ON, the Electronic

Surface Elements are also in Sabbath mode. This means

that all electronic surface element control displays show

“Sb”. The surface elements can be used even if the Sabbath

Feature is on.

To turn ON a Surface Element when the Oven Sabbath

Feature is active:

If you turn on a surface element when the oven Sabbath

feature is on, the electronic surface element control will record

thatrequestandexecuteitwitha15-30secondsdelay.So

the element will start heating 15-30 seconds after the surface

element control was turned on. As the oven control, the

surface element display will not show the setting because

“Sb” is on in the displays. When necessary, it is possible to

adjust the power of the surface element but you have to

remember that the surface element control will adjust the

temperature with the same delay.

To turn OFF the Surface Element when the Oven Sabbath

Mode is active:

To shut off the surface element while the Sabbath feature

is ON, proceed as usual but take note that the element will

immediately turn off without any delay.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 92 93

Komentarze do niniejszej Instrukcji

Brak uwag

Electrolux Electric Slide-In Range Instrukcja Naprawy Strona 35

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Piekarniki Electrolux Electric Slide-In Range