Electrolux FEH60G2101 Instrukcja Użytkownika Pobierz pdf (Strona 27)

Make sure that the surface behind the

appliance is smooth.

1. Set the correct height and area for

the appliance before you attach the

anti-tilt protection.

2. Install the anti-tilt protection 77 mm

down from the top surface of the

appliance and 49 mm from the left

side of the appliance into the circular

hole on the bracket. See the

illustration. Screw it into the solid

material or use applicable

reinforcement (wall).

3. You can find the hole on the left side

at the back of the appliance. See the

illustration. Lift the front of the

appliance (1) and put it in the middle

of the space between the cupboards

(2). If the space between the bench

cupboards is larger than the width of

the appliance, you must adjust the

side measurement to centre the

appliance.

1

2

49 mm

77 mm

12.5 Electrical installation

WARNING!

The manufacturer is not

responsible if you do not

follow the safety precautions

from Safety chapters.

This appliance is supplied without a main

plug or a main cable.

Applicable cable types: H07 RN-F, H05

RN-F, H05 RR-F, H05 VV-F, H05 V2V2-

F (T90), H05 BB-F.

13. ENERGY EFFICIENCY

13.1 Hob - Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• The cookware bottom should have the

same diameter as the cooking zone.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

ENGLISH 27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Komentarze do niniejszej Instrukcji

Brak uwag