Electrolux EKK615A1OX Instrukcja Użytkownika Pobierz pdf (Strona 30)

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the

minimum position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the hob back on.

14.12 Levelling

CAUTION!

Remove all the accessories

from the oven.

1. Open the lid of the appliance and

disassemble the lid, the pan supports

and all the burner assemblies.

2. Put the appliance on the sidewall on

a clean and smooth surface. Place

each foot into a separate hole, in the

plinth, and rotate it counterclockwise.

B

3. If the floor is not equally flat, use the

adjustable feet on the bottom of the

appliance to set a stable position for

the appliance.

To install all the accessories, do the first

step in an opposite sequence.

14.13 Anti-tilt protection

Set the correct height and area for the

appliance before you attach the anti-tilt

protection.

CAUTION!

Make sure you install the

anti-tilt protection at the

correct height.

Make sure that the surface

behind the appliance is

smooth.

You must install the anti-tilt protection. If

you do not install it, the appliance can tilt.

www.electrolux.com30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Komentarze do niniejszej Instrukcji

Brak uwag