Electrolux EKG64100OX Instrukcja Użytkownika Pobierz pdf (Strona 10)

WARNING!

If the burner does not light after

10 seconds, release the control

knob, turn it into off position and

try to light the burner again after

minimum 1 minute.

You can light the burner without

electrical device (e.g. when there

is no electricity in the kitchen). Put

the flame near the burner, turn the

related knob to the maximum gas

release position and push it down

for 10 seconds.

Turning the burner off

To put the flame out, turn the knob to the

symbol

.

WARNING!

Always turn the flame down or

switch it off before you remove the

pans from the burner.

6. HOB - HELPFUL HINTS AND TIPS

6.1 Energy savings

• If possible, always put the lids on the

cookware.

• When the liquid starts to boil, turn down

the flame to barely simmer the liquid.

WARNING!

Use pots and pans with bottom

dimensions applicable to the di-

mension of burner.

Burner Diameters of cook-

ware

Rapid 160 - 260 mm

Semi-rapid 140 - 240 mm

Auxiliary 120 - 180 mm

Use cookware with the bottom as thick

and flat as possible.

7. HOB - CARE AND CLEANING

WARNING!

Refer to the Safety chapters.

WARNING!

Deactivate the appliance and let it

cool down before you clean it.

Disconnect the appliance from the

electrical supply before you do

cleaning or maintenance work.

WARNING!

For safety reasons, do not clean

the appliance with steam cleaners

or high-pressure cleaners.

WARNING!

Do not use abrasive cleaners,

steel wool pads or acids. They

can cause damage to the appli-

ance.

Scratches or dark stains on the

surface have no effect on how the

appliance operates.

• You can remove the pan supports to

easily clean the hob.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy

water and dry them carefully before you

put them back.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

• The pan supports are not dishwasher

proof. They must be washed by hand.

• When you wash the pan supports by

hand, take care when you dry them as

the enamelling process occasionally

leaves rough edges. If necessary, re-

move stubborn stains using a paste

cleaner.

10

www.electrolux.com

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Komentarze do niniejszej Instrukcji

Brak uwag