Electrolux EKC60751X Instrukcja Użytkownika Pobierz pdf (Strona 45)

The blade scraper

EEP

THE

BLADE

SCRAPER

OUT

THE

REACH

CHILDREN

. Use the

blade scraper with care, the blade is

extremely sharp.

Use the scraper to remove boil-over from the

ceramic glass plate. Do not use the scraper

or other sharp implements on the silicon

edge since this implies a safety risk and can

cause damage.

HOW

USE

THE

BLADE

SCRAPER

1 Pull back the guard so that the blade is

visible (

SEE

ILLUSTRATION

2 Make sure that the blade is clean and

whole, otherwise it could damage the

plate. You can buy new blades at a

hardware store.

3 Hold the scraper at an angle of about

45° and scrape clean. You can press

the blade hard against the plate

without damaging it.

4 Carefully wipe off any dirt from the

blade with kitchen tissue.

5 After use, press the guard forward so

that it covers the blade. Store the

scraper out of the reach of children.

REPLACING

THE

BLADE

1 Open the scraper by fully loosening

the screw (no screwdriver needed)

and fitting the new blade at the front

edge.

2 Assemble the scraper and tighten the

screw again.

3 Press the guard as far forward as it

will go to protect the blade.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag

Electrolux EKC60751X Instrukcja Użytkownika Strona 45

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Electrolux EKC60751X