Electrolux EBCGL6CN Instrukcja Użytkownika Pobierz pdf (Strona 17)

3

4

4

60º

5

Installing the oven door

1.

Hold the door on the two sides at an

angle of approximately 60°.

2.

Push the door hinges at the same

time into the two recesses at the bot-

tom of the oven on the left and the

right, as far as they go.

3.

Lift the door up until you meet the

point of resistance and then open it

as far as possible.

4.

Fully lock the clamping levers on the

hinges

5.

Close the oven door.

11.3 Lamp

WARNING!

There is a risk of electrical shock.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the lamp on the left side of

the cavity

1.

Remove the left shelf support to get

access to the lamp.

2.

Use a narrow, blunt object (e.g. a tea-

spoon) to remove the glass cover.

Clean the glass cover.

3.

If necessary, replace the lamp with an

applicable 300 °C heat-resistant

lamp.

4.

Install the glass cover.

5.

Install the shelf support.

12. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

Problem Possible cause Remedy

The appliance does

not heat up.

The appliance is deactiva-

ted.

Activate the appliance.

The appliance does

not heat up.

The clock is not set. Set the clock.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag