
You can use the functions
Duration and End at
the same time to set the time
for how long the appliance
should operate and when the
appliance should deactivate.
This lets you activate the
appliance with a delay in
time. First set the Duration
and then the End .
9.4 Setting the clock functions
For Duration and End , set an oven
function and temperature of cooking. This
is not necessary for the Minute Minder .
1. Press
again and again until the
indicator for the necessary clock
function starts to flash.
2. Press
or to set the time for the
necessary clock function.
The clock function operates. The display
shows the indicator for the clock function
you set.
For the Minute Minder
function the display shows
the time left.
3. When the time ends the indicator of
the clock function flashes and an
acoustic signal sounds. Press a
button to stop the signal.
4. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
With the Duration and End
functions, the appliance
deactivates automatically.
9.5 Cancelling the clock
functions
1. Press the again and again until the
necessary function indicator flashes.
2. Press and hold .
The clock function goes out after some
seconds.
10. OVEN - USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
10.1 Inserting the accessories
Wire shelf:
The wire shelf has a special
shape in the rear which help
with the heat circulation.
Push the shelf between the guide bars of
the shelf support. The double side edges
should be at the back of the oven and
point up.
Tray:
Do not push the baking tray
all the way to the back wall of
the cavity. This prevents the
heat from circulating around
the tray. The food may be
burnt, especially in the rear
part of the tray.
Push the tray or pan between the guide
bars of the shelf support. Make sure it
does not touch the back wall of the oven.
ENGLISH
13
Komentarze do niniejszej Instrukcji