Electrolux EHGL4SP Instrukcja Użytkownika Pobierz pdf (Strona 13)

If you touch while you

set the DURATION, the

appliance switches to the

setting of the END

function.

6. When the set time ends, an acoustic

signal sounds for two minutes.

and time setting flash in the display.

The appliance deactivates.

7. Touch a sensor field to stop the

acoustic signal.

8. Deactivate the appliance.

7.4 Setting the END

1. Activate the appliance and set an oven

function and temperature.

2. Touch again and again until the

display shows .

flashes in the display.

3. Use or to set the END and

to confirm. First you set the minutes

and then the hours.

When the set time ends, an acoustic

signal sounds for two minutes. symbol

and the time setting flash in the display.

The appliance deactivates.

4. Touch a sensor field to stop the

acoustic signal.

5. Deactivate the appliance.

7.5 Setting the MINUTE MINDER

Use the MINUTE MINDER to set a

countdown (maximum 2 h 30 min). This

function has no effect on the operation of

the oven. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

1. Touch .

and "00" flash in the display.

2. Use or to set the MINUTE

MINDER. First you set the seconds,

then the minutes and the hours.

3. Touch and at the same time

to reset the set time.

4. Touch or the MINUTE MINDER

starts automatically after five seconds.

When the set time ends, an acoustic

signal sounds for two minutes and 00:00

and flash in the display.

5. Touch a sensor field to stop the

acoustic signal.

7.6 Setting the Time delay

function

The DURATION and END can be

used at the same time, if the appliance is

to be switched on and off automatically

later. In this case, first set the DURATION

and then the END function (refer to

"Setting the DURATION" and "Setting the

END" ).

8. AUTOMATIC PROGRAMMES

WARNING!

Refer to Safety chapters.

There are 9 automatic programmes. The

display shows the shelf position and the

default cooking times for all automatic

programmes. You can find the recipes for

the automatic programmes in the "Recipe

book".

8.1 Automatic programmes

1. Activate the appliance.

2. Touch .

The display shows the number of the

automatic programme (P1 – P9).

3. Touch or to choose the

automatic programme.

4. Touch or wait five seconds until

the appliance automatically starts to

work.

5. When the set time ends, an acoustic

signal sounds for two minutes. The

symbol flashes.

The appliance deactivates.

6. Touch a sensor field to stop the

acoustic signal.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag