Electrolux EHG7763X Instrukcja Użytkownika Strona 9

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 36
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 8
electrolux 9
Lighting the burnersLighting the burners
Lighting the burnersLighting the burners
Lighting the burners
For easier lighting, proceed beforeFor easier lighting, proceed before
For easier lighting, proceed beforeFor easier lighting, proceed before
For easier lighting, proceed before
putting a pan on the pan support.putting a pan on the pan support.
putting a pan on the pan support.putting a pan on the pan support.
putting a pan on the pan support.
To light a burner:
z turn the relevant knob anti-clockwise to
maximum position (
), then push it
down to ignite the burner.
z Upon ignition, keep the knob pushed
down about
5 seconds 5 seconds
5 seconds 5 seconds
5 seconds. This will allow
the "thermocouple" (Fig. - letter D) to be
heated and the safety device to be
switched off, otherwise the gas supply
would be interrupted.
z Then, check the flame is regular and
adjust it as required.
z To put the flame out, turn the knob to the
symbol
z.
If the burner does not ignite, turn the
control knob to zero, and try again.
If you cannot light the flame even after
several attempts, check the "cap" (Fig. -
lett.
AA
AA
A) and the"crown" (Fig. - lett.
BB
BB
B) are in
the correct position.
Operation
)
Do not keep the control knob pressed for more than 15Do not keep the control knob pressed for more than 15
Do not keep the control knob pressed for more than 15Do not keep the control knob pressed for more than 15
Do not keep the control knob pressed for more than 15
seconds. If the burner does not light even after 15 seconds,seconds. If the burner does not light even after 15 seconds,
seconds. If the burner does not light even after 15 seconds,seconds. If the burner does not light even after 15 seconds,
seconds. If the burner does not light even after 15 seconds,
release the control knob, turn it the “off” position and wait forrelease the control knob, turn it the “off” position and wait for
release the control knob, turn it the “off” position and wait forrelease the control knob, turn it the “off” position and wait for
release the control knob, turn it the “off” position and wait for
at least one minute before trying to light the burner again.at least one minute before trying to light the burner again.
at least one minute before trying to light the burner again.at least one minute before trying to light the burner again.
at least one minute before trying to light the burner again.
If the burner accidentally goes out, turn the control knob toIf the burner accidentally goes out, turn the control knob to
If the burner accidentally goes out, turn the control knob toIf the burner accidentally goes out, turn the control knob to
If the burner accidentally goes out, turn the control knob to
the “off” position and wait for at least 1 minute before tryingthe “off” position and wait for at least 1 minute before trying
the “off” position and wait for at least 1 minute before tryingthe “off” position and wait for at least 1 minute before trying
the “off” position and wait for at least 1 minute before trying
to light the burner again.to light the burner again.
to light the burner again.to light the burner again.
to light the burner again.
In the absence of electricityIn the absence of electricity
In the absence of electricityIn the absence of electricity
In the absence of electricity, ignition can occur without the electrical
device; in this case, approach the burner with a flame, push the relevant
knob down and turn it anti-clockwise until it reaches the maximum
position.
AA
AA
A - Burner cap
BB
BB
B - Burner crown
CC
CC
C - Ignition electrode
DD
DD
D - Thermocouple
A
B
C
Triple crown burner
D
Przeglądanie stron 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag