Electrolux EBSL60SP Instrukcja Użytkownika Pobierz pdf (Strona 21)

45°

3.

Close the door until it is at an angle

of approximately 45°.

4.

Hold the door with one hand on each

side and pull it away from the appli-

ance at an upwards angle.

Put the door with the outer side

down on a soft and level surface

to prevent scratches.

Inserting the door

To insert the door do the above steps in

the opposite sequence.

11.4 Lamp

WARNING!

Danger of electrocution! Discon-

nect the fuse before you replace

the lamp.

The lamp and the lamp glass cov-

er can be hot.

Before you change the lamp:

• Deactivate the appliance.

• Remove the fuses from the fuse box or

deactivate the circuit breaker.

CAUTION!

Put a cloth on the bottom of the

interior of the appliance. It pre-

vents damage to the lamp glass

cover and the cavity.

Always use the same lamp type.

Replacing the top lamp:

1.

Turn the lamp glass cover counter-

clockwise to remove it.

2.

Clean the glass cover.

3.

Replace the lamp with a halogen, 230

V, 40 W, 300 °C heat resistant oven

lamp.

4.

Install the glass cover.

Replacing the side lamp:

1.

Remove the left shelf support to get

access to the lamp.

2.

Use a narrow, blunt object (e.g. a tea-

spoon) to remove the glass cover.

Clean the glass cover.

3.

Replace the lamp with a halogen, 230

V, 25 W, 300 °C heat resistant oven

lamp.

4.

Install the glass cover.

5.

Install the shelf support.

12. WHAT TO DO IF…

WARNING!

Refer to the Safety chapters.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag