Electrolux TY38TSCN Instrukcja Użytkownika Pobierz pdf (Strona 58)

Problem Possible cause Remedy

An acoustic signal sounds and

the appliance deactivates.

An acoustic signal sounds

when the appliance is deactiva-

ted.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

The appliance deactivates. You put something on the sen-

sor field

.

Remove the object from the

sensor field.

The residual heat indicator

does not come on.

The roasting zone is not hot

because it operated only for a

short time.

If the roasting zone operated

sufficiently long to be hot,

speak to the service centre.

There is no signal when you

touch the panel sensor fields.

The signals are deactivated. Activate the signals (refer to

“OffSound Control”).

comes on

The Automatic Switch Off oper-

ates.

Deactivate the appliance and

activate it again.

comes on

The Child Safety Device or the

Lock function operates.

Refer to the chapter “Daily

Use”.

and number come on.

There is an error in the appli-

ance.

Disconnect the fuse from the

electrical system of the house

in order to disconnect the ap-

pliance from the electrical sup-

ply for some time. Connect it

again. If

comes on again,

speak to the service centre.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the customer service. Give the data from

the rating plate, three digit letter code for

the glass ceramic (it is in the corner of the

glass surface) and an error message that

comes on.

Make sure, you operated the appliance cor-

rectly. If not the servicing by a customer

service technician or dealer will not be free

of charge, also during the warranty period.

The instructions about the customer service

and conditions of guarantee are in the guar-

antee booklet.

INSTALLATION

Warning! Refer to the Safety chapters.

Before the installation

Before the installation of the appliance, re-

cord the information below from the rating

plate. The rating plate is on the bottom of

the appliance casing.

• Model ...........................

• PNC .............................

• Serial number ....................

Warning! During installation in

combustible matter, NIN SEV 1000 and

fire protection guidelines and

regulations of the Association of

Cantonal Fire Insurance shall be strictly

adhered to.

BUILT-IN APPLIANCES

• Only use the built-in appliances after you

assemble the appliance into correct built-

in units and work surfaces that align to

the standards.

CONNECTION CABLE

• The appliance is supplied with the con-

nection cable.

• Replace the damaged mains cable with a

special cable (type H05VV-F or higher).

Speak to your local Service Centre.

ELECTRICAL CONNECTION

• Install the appliance with a socket supply

line. If there is no socket supply line, the

fixed home electrical system must include

an isolating device with at least a 3 mm-

contact separation to enable a simultane-

58 electrolux

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64

Komentarze do niniejszej Instrukcji

Brak uwag