Electrolux TG091 Podstawowy Przewodnik Strona 30

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 36
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 29
To remove the frost, follow the instructions below:
1. Switch off the appliance and disconnect the
mains plug from the mains socket.
2. Remove any stored food, wrap it in several lay-
ers of newspaper and put it in a cool place.
Caution! Do not touch frozen goods with
wet hands. Hands can freeze to the goods.
3. Leave the door open and insert the plastic
scraper in the appropriate seating at the bot-
tom centre, placing a basin underneath to col-
lect the defrost water.
In order to speed up the defrosting process,
place a pot of warm water in the freezer com-
partment. In addition, remove pieces of ice that
break away before defrosting is complete.
4. When defrosting is completed, dry the interior
thoroughly and keep the scraper for future use.
5. Switch on the appliance.
6. Turn the Temperature Regulator to a medium
position and leave to run for at least 4 hours
with the "Freezer Switch" switch on.
7. After the Red Indicator Light has gone out, re-
load the previously removed food into the com-
partments.
Warning! Never use sharp metal tools to
scrape off frost from the evaporator as you
could damage it.
Do not use a mechanical device or any artificial
means to speed up the thawing process other than
those recommended by the manufacturer.
A temperature rise of the frozen food packs, during
defrosting, may shorten their safe storage life.
Periods of non-operation
When the appliance is not in use for long periods,
take the following precautions:
1. disconnect the appliance from electricity sup-
ply
2. remove all food
3. defrost and clean the appliance and all acces-
sories
4. leave the door/doors open to prevent unpleas-
ant smells.
Important! If the cabinet will be kept on, ask
somebody to check it once in a while to prevent
the food inside from spoiling in case of a power
failure.
What to do if…
Normal Operating Sounds
You may hear a faint gurgling and a bubbling
sound when the refrigerant is pumped through
the coils or tubing. This is correct.
When the compressor is on, the refrigerant is
being pumped around and you will hear a whir-
ring sound and a pulsating noise from the com-
pressor. This is correct.
The thermic dilatation might cause a sudden
cracking noise. It is natural, not dangerous phys-
ical phenomenon. This is correct.
When the compressor switches on or switches
off, you will hear a faint "click" of the temperature
regulator. This is correct.
Technical data
EUT10001W EUT10002W
Dimension
Height 850 mm 850 mm
Width 550 mm 550 mm
Depth 612 mm 612 mm
Rising Time 22 h 22 h
The technical information are situated in the rating
plate on the internal left side of the appliance and
in the energy label.
30 electrolux
Przeglądanie stron 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Komentarze do niniejszej Instrukcji

Brak uwag