Electrolux EBGL7SP Instrukcja Użytkownika Strona 21

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 28
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 20
Problem Possible cause Solution
The appliance does not
heat up.
The appliance is deacti-
vated.
Activate the appliance.
The appliance does not
heat up.
The time of day is not set. Set the clock. Refer to
"Setting and changing the
time".
The appliance does not
heat up.
The necessary settings
are not set.
Make sure that the set-
tings are correct.
The appliance does not
heat up.
The fuse is released. Make sure that the fuse is
the cause for the mal-
function. If the fuse relea-
ses again and again, refer
to an authorized electri-
cian.
The lamp does not oper-
ate.
The lamp is defective. Replace the lamp.
The display shows an er-
ror code that is not in this
table.
There is an electronic
fault.
Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
If the display shows the
error code again, refer
to the Service Center.
The appliance is activated
and does not heat up.
The fan does not operate.
The display shows
“Demo”.
The test mode is activa-
ted.
1.
Deactivate the appli-
ance.
2.
Touch and hold
until the appliance
activates and deacti-
vates.
3.
Touch and hold
and at the same
time until an acoustic
signal sounds and
“Demo” goes out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (Mod.) .........................................
Product number (PNC) .........................................
Serial number (Serie:) .........................................
ENGLISH 21
Przeglądanie stron 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Komentarze do niniejszej Instrukcji

Brak uwag