Electrolux EWF146410W Instrukcja Użytkownika

EWF 146410 W... ...EN WASHING MACHINE USER MANUAL

SELECT THE AVAILABLE OPTION BYPRESSING BUTTONS 3, 4 AND 5Depending on the selected programme, dif-ferent functions can be combined beforepressing the

ALTERING AN OPTION OR A RUNNINGPROGRAMMEIt is possible to change some options be-fore the programme carries them out .Before you make any change, you

BEFORE LOADING THE LAUNDRYNever wash whites and coloureds together.Whites may lose their «whiteness» in thewash.New coloured items may run in the firs

• large amounts of foam form during wash-ing.DEGREES OF WATER HARDNESSWater hardness is classified in so-called“degrees” of hardness. Information on h

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment Zijde - Soie

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment Katoen Eco -

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment /OFFFor canc

DESCALINGThe water we use normally contains lime. Itis a good idea to periodically use a watersoftening powder in the machine. Do thisseparately from

2. Run a washing cycle without any wash-ing to clean off any cleaning agent resi-dues.Programme: Short Cotton Programmeat maximum temperature and add

8. Make sure that the impeller of thepump can turn. If this does not occur,contact the service centre.9. Clean the filter under the water tap andput i

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comCONTENTSSafety information 2Safety instructions 3Product description

When you drain the water with the emer-gency drain procedure, you must activateagain the drain system:1. Put 2 litres of water in the main washcompart

Problem Possible cause/SolutionThe machine does not fill:The water tap is closed. • Open the water tap.The inlet hose is squashed or kinked. • Check t

Problem Possible cause/SolutionThe machine vibrates isnoisy:The transit bolts and packing have not been removed.• Check the correct installation of th

INSTALLATIONUNPACKINGAll transit bolts and packing must be re-moved before using the appliance.You are advised to keep all transit devicesso that they

Any necessary adjustment can be madewith a spanner. Accurate levelling preventsvibration, noise and displacement of themachine during operation.Cautio

chine is emptying. This could be done bytying it to the tap with a piece of string orattaching it to the wall.• In a sink drain pipe branch. Thisbranc

26 electrolux

electrolux 27

www.electrolux.com/shop 132943881-A-062013

• Obey the maximum load volume of 6 kg (refer to the “Pro-gramme chart” chapter).• If the supply cord is damaged, it must be replaced by themanufactur

• Before you connect the appliance to newpipes or pipes not used for a long time,let the water flow until it is clean.• The first time you use the app

DETERGENT DISPENSER DRAWER Compartment for detergent used forprewash and soak phase or for stain re-mover used during the stain action phase (ifavaila

CONTROL PANELBelow is a picture of the control panel. It shows the programme selector dial as well asthe buttons, pilot light and the display. These a

extra quantity of water (extra rinse), selectthis option. Some additional rinses will beperformed. This option is recommended forpeople who are allerg

When the programme has finished threeflashing zeros are displayed, the pilot light9 and the pilot light of button 8 go outand the door can be opened.7

Make sure that no laundry stays betweenthe seal and the door. There is a risk of wa-ter leakage or damage to the laundry. Measure out the detergent an