Electrolux EOC69400X Instrukcja Użytkownika Pobierz pdf (Strona 53)

Connection via Min. size Cable/

flex

Cable/flex type Fuse

Cooker Control

Circuit

2,5 mm² PVC/PVC twin and

earth

min: 15 A

max: 20 A

It is necessary that you install a double

pole switch between the oven and the

electricity supply (mains), with a mini-

mum gap of 3 mm between the switch

contacts and of a type suitable for the

required load in compliance with the cur-

rent regulations.

The switch must not break the yellow

and green earth cable at any point.

After installation and connecting,

the cable must be placed so that it

cannot at any point reach a

temperature of more than 50°C

above the ambient temperature.

Before the oven is connected, check

that the main fuse and the domestic

installation can support the load;

and that the power supply is

properly earthed.

The manufacturer declines any

responsibility should these safety

measures not be carried out.

Installation

IMPORTANT

The new appliance may only be in-

stalled and connected by a qualified

installation engineer.

Please comply with this instruction.

If you do not, any damage resulting

is not covered by the warranty.

Safety information for the installer

• The set-up of the electrical installation

is arranged so that the appliance can

be isolated from the mains with a mini-

mum 3 mm all-pole contact separa-

tion.

Suitable isolation devices include, for

example, circuit breakers, fuses

(screw type fuses are to be removed

from the holder), RCDs and contac-

tors.

• Anti-shock protection must be provi-

ded by the installation.

• The built-in unit must meet the stability

requirements of DIN 68930.

installation electrolux 53

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 63 64

Komentarze do niniejszej Instrukcji

Brak uwag