Electrolux GK80RPLCN Instrukcja Użytkownika Pobierz pdf (Strona 8)

7.1 What to do if...

Problem Possible cause Remedy

You cannot activate or op-

erate the hob.

The fuse is released. Make sure that the fuse is

the cause of the malfunc-

tion. If the fuse releases

again and again, contact a

qualified electrician.

Residual heat indicator

does not come on.

The zone is not hot be-

cause it operated only for a

short time.

If the zone operated suffi-

ciently long to be hot,

speak to an Authorised

Service Centre.

There is a dark area

on the multiple zone.

It is normal that there is a

dark area on the multiple

zone.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also three

digit letter code for the glass ceramic (it is

in the corner of the glass surface) and an

error message that comes on. Make sure,

you operated the hob correctly. If not the

servicing by a service technician or dealer

will not be free of charge, also during the

warranty period. The instructions about

the Service Centre and conditions of

guarantee are in the guarantee booklet.

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

8.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in units

and work surfaces that align to the

standards.

During installation in combustible matter,

NIN SEV 1000 and fire protection

guidelines and regulations of the

Association of Cantonal Fire Insurance

shall be strictly adhered to.

8.3 Electrical connection

Install the hob with a socket supply line. If

there is no socket supply line, the fixed

home electrical system must include an

isolating device with at least a 3 mm-

contact separation to enable a

simultaneous and all-pole cut off from the

mains (according to NIN SEV 1000).

www.electrolux.com8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag