Electrolux FEH50P2 Instrukcja Użytkownika Pobierz pdf (Strona 19)

2. Slowly lift the drawer.

3. Pull the drawer out fully.

To install the drawer, do the above steps

in the opposite sequence.

12.6 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a halogen,

230 V, 40 W, 300 °C heat resistant

lamp.

4. Install the glass cover.

13. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

13.1 What to do if...

Problem Possible cause Remedy

You cannot activate the

appliance.

The appliance is not con‐

nected to an electrical sup‐

ply or it is connected incor‐

rectly.

Check if the appliance is

correctly connected to the

electrical supply.

You cannot activate or op‐

erate the hob.

The oven does not heat

up.

The fuse is released. Make sure that the fuse is

the cause of the malfunc‐

tion. If the fuse releases

again and again, contact a

qualified electrician.

You cannot activate or op‐

erate the hob.

The fuse is released. Activate the hob again and

set the heat setting in less

than 10 seconds.

The lamp does not oper‐

ate.

The lamp is defective. Replace the lamp.

Steam and condensation

settle on the food and in

the cavity of the oven.

You left the dish in the

oven for too long.

Do not leave the dishes in

the oven for longer than 15

- 20 minutes after the

cooking process ends.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag