Electrolux EHS6140HOW Instrukcja Użytkownika Pobierz pdf (Strona 9)

Do not connect a damaged appliance.

If it is necessary, speak to the supplier.

• Installation and connection of the

appliance to the power supply must

only be carried out by qualified per-

sonnel.

• Only use built-in appliances after you

assemble the appliance into correct

built-in units and work surfaces that

obey the standards.

• Do not change the specifications or

modify this product. Risk of injury and

damage to the appliance.

• Fully obey the laws, ordinances, direc-

tives and standards in force in the

country where you use the appliance

(safety regulations, recycling regula-

tions, electrical safety rules etc.)!

• Keep the minimum distances to other

appliances and units!

• Install anti-shock protection, for exam-

ple install the drawers only with a pro-

tective panel directly below the appli-

ance!

• Prevent damage of the cut surfaces of

the worktop against moisture with a

correct sealant!

• Prevent damage of the bottom of the

appliance from steam and moisture,

e.g. from a dishwasher or oven!

• Do not install the appliance adjacent to

doors and below windows! If not, hot

cookware can be hit off the hob when

you open doors or windows.

• Disconnect the appliance from the

electrical supply, before you do

maintenance work or clean.

WARNING!

Risk of injury from electrical cur-

rent. Carefully obey the instruc-

tions for electrical connections.

• The electrical mains terminal is live.

• Make electrical mains terminal free of

voltage.

• Install correctly to give anti-shock pro-

tection.

• Loose and incorrect mains plug and

socket connections can make the ter-

minal become too hot.

• A qualified electrician must install the

clamping connections correctly.

• Use a strain relief clamp on cable.

• Use the correct mains connection cable

and replace the damaged mains cable

with proper special cable. Speak your

local Service Force Centre.

• The appliance must have the electrical

installation which lets you disconnect

the appliance from the mains at all

poles with a contact opening width of

minimum 3 millimeters.

• If the fixing bracket is near to the termi-

nal block, always make sure the con-

nection cable does not come in contact

with the edge of the bracket.

• You must have correct isolation devi-

ces: line protecting cut-outs, fuses

(screw type fuses removed from the

holder), ground leakage trips and con-

tactors.

Manufacturer is not responsible for

any injury to persons and pets or

damage to property caused by failure

to obey these requirements.

7.3 Electrical connection

• Do not pull the mains cable to discon-

nect the appliance. Always pull the

mains plug (if applicable).

• The appliance must not be connected

with an extension cable, an adapter or

a multiple socket. There is a risk of fire.

• Do not let the power cable to heat up

to a temperature of more than 90° C.

The cable is guided by means of

clamps fixed to the side of the cabinet,

in order to avoid any contact with the

equipment beneath the cooktop. Se-

cure the cable by means of the clamp

screws and refit the terminal block cov-

er.

Electrical Requirements

Permanent electrical installation must

agree with the latest I.E.E. Regulations

and local Electricity Board regulations. For

your own safety the installation must be

done by a qualified electrician (e.g. your

local Electricity Board, or a contractor

who is on the roll of the National Inspec-

tion Council for Electrical Installation Con-

tracting [NICEIC]).

The manufacturer refuses to be

held responsible, if these safety

measures are not abided by.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

Electrolux EHS6140HOW Instrukcja Użytkownika Strona 9

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Electrolux EHS6140HOW