Electrolux EHP6612K Instrukcja Użytkownika Pobierz pdf (Strona 16)

1 Safety Instructions for

the Installer

• A device must be provided in the electrical installa-

tion which allows the appliance to be disconnected

from the mains at all poles with a contact opening

width of at least 3 mm.

Suitable isolation devices include line protecting

cut-outs, fuses (screw type fuses are to be re-

moved from the holder), earth leakage trips and

contactors.

• In respect of fire protection, this appliance corre-

sponds to type Y (EN 60 335-2-6). Only this type of

appliance may be installed with a high cupboard or

wall on one side.

• Drawers may not be fitted underneath the hob.

• The installation must guarantee shock protection.

• The kitchen unit in which the appliance is fitted

must satisfy the stability requirements of

DIN 68930.

• For protection against moisture, all cut surfaces

are to be sealed with a suitable sealant.

• On tiled work surfaces, the joints in the area where

the hob sits must be completely filled with grout.

• On natural, artificial stone, or ceramic tops, the

snap action springs must be bonded in place with

a suitable artificial resin or mixed adhesive.

• Ensure that the seal is correctly seated in the frame

and that it is seated against the work surface with-

out leaving any gaps. Additional silicon sealant

must not be applied; this will make removal more

difficult when servicing.

• The hob must be pressed out from below when re-

moved.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Brak uwag

Electrolux EHP6612K Instrukcja Użytkownika Strona 16