Electrolux EGG6242NOX Instrukcja Użytkownika

EGG6242EN Hob User Manual

6.5 Periodic maintenanceSpeak to your local Authorised ServiceCentre periodically to check theconditions of the gas supply pipe and thepressure adjust

7.3 Labels supplied with theaccessories bagStick the adhesive labels as indicatedbelow:MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NO.

For appliances installed in the Republicof Ireland please refer to NSAI- DomesticGas Installation I.S. 813 Current Editionsand the ETCI Rules for Elec

CAUTION!It is important to install theelbow correctly, with theshoulder on the end of thethread, fitted to the hobconnecting pipe.CAUTION!Failure to e

The manufacturer refusesto be held responsible, ifthese safety measures arenot abided by.Supply connectionsThis hob has to be connected to 220-240V ~

with the letter 'E', or the earth symbol, or coloured green and yellow.2. Connect the blue (neutral) wire to theterminal which is marked wit

9. TECHNICAL INFORMATION9.1 Hob dimensionsWidth 594 mmDepth 510 mm9.2 Bypass diametersBURNER Ø BYPASS 1/100 mmRapid 42Semi-rapid 32Auxiliary 289.3 Oth

9.5 Gas burners for LPG G30/G31 28-30/37 mbarBURNER NORMALPOWERkWMINIMUMPOWERkWINJECTORMARK 1/100mmNOMINAL GAS FLOW g/hG30 28-30mbarG31 37 mbarRapid 2

• When the liquid starts to boil, turn down the flame to barely simmer the liquid.• If it is possible, use a pressure cooker. Refer to its user manual

ENGLISH 19

CONTENTS1. SAFETY INFORMATION...22. SAFETY INSTRUCTIONS...

www.electrolux.com/shop867305795-D-212015

injuries and damages. Always keep the instructions withthe appliance for future reference.1.1 Children and vulnerable people safety• This appliance ca

• If the supply cord is damaged, it must be replaced bythe manufacturer, an authorized Service or similarlyqualified persons in order to avoid a hazar

• Do not let the electricity mains cabletangle.• Make sure that a shock protection isinstalled.• Use the strain relief clamp on thecable.• Make sure t

WARNING!Risk of damage to theappliance.• Do not keep hot cookware on thecontrol panel.• Do not let cookware to boil dry.• Be careful not to let object

3. PRODUCT DESCRIPTION3.1 Cooking surface layout23411Semi-rapid burner2Rapid burner3Auxiliary burner4Control knobs3.2 Control knobSymbol Descriptionno

lets the thermocouple warm up. Ifnot, the gas supply is interrupted.3. Adjust the flame after it is regular.If after some tries the burnerdoes not lig

CAUTION!Make sure that the pots areplaced centrally on theburner in order to getmaximum stability and to getlower gas consumption.5.2 Diameters of coo