Electrolux EKM70150X Instrukcja Użytkownika Pobierz pdf (Strona 47)

3. Remove the faulty bulb and replace it with

the new one.

4. Refit the glass cover.

5. Reconnect to the electrical supply.

Mounting the splashback

The appliance is fitted with a metal back-

guard which should be fitted to the rear of the

cooktop. You will find the backguard inserted

on top of the polystyrene packing.

Mount the backguard as follows:

1. carefully clean the cooktop, removing

residue of protective film and any traces

of grease;

2. in a plastic bag you will find the two

chrome supports and special screws to

fasten the backguard;

3. fasten the two supports at the back of the

cooktop using the two screws, taking

care not to obstruct the air vents;

4. remove the protective film from the back-

guard;

5. insert it into the supports as indicated on

the picture below, locking it to the ends

with the four screws supplied

electrolux 47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 55 56

Brak uwag

Electrolux EKM70150X Instrukcja Użytkownika Strona 47