Electrolux EHS8680XHIC9064B Instrukcja Użytkownika Strona 31

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 108
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 30
31
The residual heat display does
not indicate anything.
The cooking zone was only
switched on for a short time.
There is no malfunction if the
cooking zone is cold.
The electronics are defective. 1. Switch off the appliance.
2. Disconnect the appliance
from the mains power
supply (remove fuse).
3. Call the customer care
service.
There was a power cut. The existing residual heat is no
longer displayed.
The automatic warm-up
function cannot be switched on.
The cooking zone still features
residual heat.
Allow the cooking zone to cool
down.
The heat setting is set via the
„heat setting selection“ sensor
field .
1. Switch off the cooking zone.
2. Set the heat setting via the
“heat setting selection“
sensor field .
The automatic timer switch-off
function cannot be set.
The cooking zone is not
selected.
Cooking zone selection
The control panel is locked. Unlock the control panel.
The automatic timer switch-off
function cannot be switched off.
The cooking zone is not
selected.
Cooking zone selection
The control panel is locked. Unlock the control panel.
The timer minute minder
cannot be set.
The automatic switch-off
function of one cooking zone is
set.
Switch off the automatic switch-
off function.
The control panel is locked. Unlock the control panel.
The timer minute minder
cannot be switched off.
The control panel is locked. Unlock the control panel.
The appliance does not
respond to control panel
entries.
The appliance is switched off. Switching on the appliance.
The electronics are defective. 1. Switch off the appliance.
2. Disconnect the appliance
from the mains power
supply (remove fuse).
3. Call the customer care
service.
The overheat protection feature
has switched off all cooking
zones and inhibited their
functions.
Allow the cooking zones to cool
down.
Malfunction Cause Remedy
Przeglądanie stron 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 107 108

Komentarze do niniejszej Instrukcji

Brak uwag