Electrolux EHB334X Instrukcja Użytkownika Pobierz pdf (Strona 11)

11

Mounting

The hob unit can be mounted in any

type of kitchen with a table surface

whose thickness is between 28 mm and

40 mm.

Fixing

Unscrew the fixing brackets just enough

so they may be turmed. Fasten the

brackets to the worktop with a screw

driver.

Cut-out measurements

One rectangular hole is sawn out for the

hob combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured length, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit. It is not

necessary to attach the reinforcement

beam to the worktop surface, as it is held

in place by a specially designed

moulding, which is incorporated in the

hob unit´s flanges.

Minimum distance

to side wall:

150 mm

Minimum distance

to back wall (non-

flammable material):

50 mm

Reinforcement

beams

Minmum distance to

any shelf underneath

shall be 245 mm +

room enough for a

bowl that can take at

least 4 litres.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag